Features and Advantages
• Designed as the next generation replacement controller for the C4 Interface Controller.
• Uses 4 Quad 16 bit DACs to control the outputs of all 16 channels.
• DAC accuracy for a desired set point is .1% of the full scale output voltage.
• Uses 18 bit ADC devices to monitor both of the independent current monitor outputs ("monitor" and "feedback" outputs) for all 16 channels.
• Has fault detection circuitry for all 16 channels.
• Ability to self monitor supply voltages and currents, and board temperature for diagnostic purposes.
• Equipped with both Ethernet and USB interface front panel connections.
• Ability to read the following parameters for each MCOR channel:
■ Set Point
■ Current Set Point
■ Monitor ADC Reading
■ Monitor Average ADC Reading
■ Monitor Ripple Measurement (in uA)
■ Feedback ADC Reading
■ Feedback Average ADC Reading
■ Feedback Ripple Measurement (in uA)
■ Full scale DAC Set Point Current
■ Full scale Monitor ADC Read Back Current
■ Ramp Rate (amps/sec)
■ Samples per Average
■ Configuration/Status Register
■ Full scale Feedback ADC Read back Current
• Designed as the next generation replacement controller for the C4 Interface Controller.
• Uses 4 Quad 16 bit DACs to control the outputs of all 16 channels.
• DAC accuracy for a desired set point is .1% of the full scale output voltage.
• Uses 18 bit ADC devices to monitor both of the independent current monitor outputs ("monitor" and "feedback" outputs) for all 16 channels.
• Has fault detection circuitry for all 16 channels.
• Ability to self monitor supply voltages and currents, and board temperature for diagnostic purposes.
• Equipped with both Ethernet and USB interface front panel connections.
• Ability to read the following parameters for each MCOR channel:
■ Set Point
■ Current Set Point
■ Monitor ADC Reading
■ Monitor Average ADC Reading
■ Monitor Ripple Measurement (in uA)
■ Feedback ADC Reading
■ Feedback Average ADC Reading
■ Feedback Ripple Measurement (in uA)
■ Full scale DAC Set Point Current
■ Full scale Monitor ADC Read Back Current
■ Ramp Rate (amps/sec)
■ Samples per Average
■ Configuration/Status Register
■ Full scale Feedback ADC Read back Current
EMCOR Controller Module General Description and Overview
|
The Ethernet MCOR (EMCOR) Controller module was designed to be used in conjunction with an MCOR Crate and up to 16 MCOR Power Supply modules as the Controller assembly for all 16 MCOR modules. The EMCOR module comes equipped with its own CPU module. Ethernet and USB interface connections are available and can be used to control the output level of all MCOR modules, as well as monitor and feedback current, ripple, and fault status of all 16 channels simultaneously. Current and Ripple measurements to the EMCOR module are provided by each of the MCOR modules using indepepndent readings (Monitor and Feedback readings) in the form of an analog voltage. The ADCs of the EMCOR module digitizes and stores the data making it easily accessible for monitoring purposes.
The EMCOR module has the ability to control all different MCOR module types in the same crate. Power for the EMCOR module is supplied by the crate. A single Bulk Power Supply supplies the power outputs for all MCOR modules residing in the crate. The EMCOR Controller module replaces the C4 Interface Module, which is now considered obsolete. See Table I below for more information regarding the EMCOR module. |
Table I- EMCOR Specifications and additional information
EMCOR User Manual
| emcor_user_manual.1b_3-3-21.pdf |
|
BiRa Systems welcomes the opportunities to work in collaborations with High Energy Physics Labs and medical cancer treatment centers. We support research and innovation by producing custom hardware and bringing cutting edge technology to new markets.
|