BiRa Systems |
CAMAC DIGITAL OUTPUT
DUAL 24-BIT OUTPUT REGISTER, SINK 300mA
The Bi Ra Model 3224 is a single-width module with two independent 24-bit output registers. Each register may be written and read as a 24-bit entry. In addition, each bit may be individually addressed using the selective set and selective reset commands. Each output is an open collector transistor suitable for driving a relay, lamp, solenoid, or similar device. All outputs share a common return path. The 3224 may be commanded to generate a 5 s output strobe to the front panel connector, 2DA31P. This may be conveniently used as a DATA READY or LATCH signal. The polarity of the strobe is patch selectable.
The output protection diode prevents excessive open-circuit voltages when driving inductive loads. The cathode of protection diodes may be tied to 5, 24, or an external voltage from the front panel connector.
A LED displays the current status of each output line. The LED indicates the status of either type of output, open collector or TTL.
| Model 3224A | Open collector, sink 300mA, maximum open circuit voltage 50 Volts |
|---|---|
| Model 3224B | TTL output, transistor are pulled to 5V with a 4.7K resistor |
| COMMAND | Q | ACTION |
|---|---|---|
| F0 A0,A1 RD1 | 1 | Reads the 24-bit data output Register 0,1. |
| F6 A0 F06 | 1 | Read the module ID = 224 decimal. |
| F16 A0,A1 WT1 | 1 | Writes the output register 0,1. |
| F18 A0,A1 SS1 | 1 | Selectively sets the output register 0,1. |
| F21 A0,A1 SC1 | 1 | Selectively clears the output register 0,1. |
| F25 A0,A1 XEQ | 1 | Executes the strobe pulse on connector 0,1. |
| C CC | 0 | Clears the output registers. |
| Z CZ | 0 | Clears the output registers. |
| X | Valid for all addressed commands. |
| +6 Volts | 960 mA |
|---|
.57Kg (1 Lb. 4Oz.)
Mating Connectors 2DA31S
Place a Request For Quotation or Purchase Order with Bi Ra Systems
| Feedback | info@bira.com | Home Page |
Bi Ra Systems,
Incorporated
2404 Comanche Road NE
Albuquerque, New Mexico 87107
Ph : 505-881-8887
Fax:505-888-0651